NetApp AltaVault AVA400 - Configuring storage settings; Configuring cloud settings

NetApp AltaVault Cloud Integrated Storage Administration Guide 35
Beta Draft
CHAPTER 4 Configuring storage settings
This chapter includes the following sections:
 “Configuring cloud settings” on page 35
 “Configuring SMB” on page 37
 “Configuring NFS” on page 42
 “Configuring OST” on page 45
 “Configuring SnapMirror” on page 47
Configuring cloud settings
You can specify cloud settings in the Configure > Cloud Settings page.
Before you configure cloud settings, you must configure DNS settings to access the cloud service provider host
machine on the Configure > Host Settings page.
This section includes the following topics:
 “Configuring cloud provider settings” on page 35
 “Configuring encryption” on page 36
 “Configuring replication” on page 36
 “Configuring bandwidth limits” on page 36
To transition cloud credentials and the encryption key from the AltaVault to a Key Management Server (KMS), refer
to the section “Configuring KMIP” on page 93.
Configuring cloud provider settings
This setting enables you to access the storage and software through the Internet. For more details on cloud provider
settings, see “Using the Cloud Settings wizard” on page 22.
Only users who have Read-Only Replication Settings permission or Read and Write Replication Settings permission
can access and configure the Cloud Settings Page.