NetApp AltaVault AVA400 - Modifying networking settings; Modifying general host settings

NetApp AltaVault Cloud Integrated Storage Administation Guide 51
Beta Draft
CHAPTER 5 Modifying networking settings
This chapter includes the following sections:
 “Modifying general host settings” on page 51
 “Modifying management interfaces” on page 53
 “Modifying data interfaces” on page 54
 “Modifying virtual interfaces (VIFs)” on page 56
 “Modifying VLANs” on page 57
Modifying general host settings
You can view and modify general host settings in the Configure > Host Settings page.Use the following groups of
controls on this page only if modifications or additional configuration is required:
 Name - Modify the hostname.
 DNS Settings - NetApp recommends that you use DNS resolution.
 Hosts - If you do not use DNS resolution, or if the host does not have a DNS entry, you can assign a host-IP
address resolution map.
 Web/FTP Proxy - Configure proxy addresses for Web or FTP proxy access to the AltaVault. The proxy settings do
not affect cloud connections originating from the AltaVault.
To view general host settings
 Choose Configure > Host Settings.
To change the hostname
1. Choose Configure > Host Settings.
2. Under Name, modify the value in the Hostname field.
3. Click Apply to apply your changes to the running configuration.