52 NetApp AltaVault Cloud Integrated Storage Administation Guide
Beta Draft
Modifying networking settings Modifying general host settings
To specify DNS settings
1. Choose Configure > Host Settings.
2. Under DNS Settings, complete the configuration as described in this table.
3. Click Apply to apply your changes to the running configuration.
To add a new host
1. Choose Configure > Host Settings.
2. Under Hosts, complete the configuration as described in this table.
3. Click Apply to apply your changes to the running configuration.
To set a Web/FTP proxy
1. Choose Configure > Host Settings.
2. Under Web/FTP Proxy, complete the configuration as described in this table.
Control Description
Primary DNS Server Specify the IP address for the primary name server.
Secondary DNS Server Optionally, specify the IP address for the secondary name server.
Tertiary DNS Server Optionally, specify the IP address for the tertiary name server.
DNS Domain List Specify an ordered list of domain names.
If you specify domains, the system automatically finds the appropriate domain for each
of the hosts that you specify in the system.
Control Description
Add a New Host Displays the controls for adding a new host.
IP Address Specify the IP address for the host.
Hostname Specify a hostname.
Add Adds the host.
Remove Selected Select the check box next to the name and click Remove Selected.
Control Description
Enable Web Proxy Enables the appliance to use a Web proxy to contact NetApp.
Web proxy access is disabled by default.
Web/FTP Proxy Specify the IP address for the Web or FTP proxy.
To Next Page
Loading...
