NetApp AltaVault Cloud Integrated Storage Administration Guide 155
Beta Draft
Viewing the storage RAID group Viewing reports and logs
Viewing the storage RAID group
The Storage RAID groups enables you to view the serial number, status, size, used, model number, and product ID.
For AVA400, the maximum number of RAID groups supported is five. For AVA800, the maximum number of RAID
groups supported is seven.
The Storage RAID groups includes the following statistics.
The Storage RAID Group report provides statistics for each group.
To view the Storage RAID Group report
1. Choose Reports > Storage RAID groups.
2. Click the serial number of a group to obtain information for the RAID.
To view diagnostics using the CLI
Run the following command to view diagnostics:
CLI > # show raidgroups
Viewing offline file system check page
The Offline File System Check page checks the integrity of the local file system and provides the diagnosis. You cannot
run the Offline File System Check if the Storage Optimization Service is running. Before you perform the Offline File
System Check, choose Maintenance > Service and click Stop to stop the Storage Optimization Service.
To view the offline file system check page
1. Choose Maintenance > Offline File System Check.
2. Click the filename to open an Offline File System Check log file or save the file to disk.
3. To remove an entry, select the box next to the name and click Remove Selected.
Field Description
Serial Number The serial number of the Storage RAID group.
Status Current state of the Storage RAID group, which is one of the following
options:
• Valid - The Storage RAID group is valid and active.
• Invalid - The Storage RAID group is not valid. Click the serial number
of the alarm information for the Storage RAID group.
Size The size of the Storage RAID group (terabytes).
Used Current space occupied by the Storage RAID group.
Model The Storage RAID group model.
Product ID The Storage RAID group product ID number.
To Next Page
Loading...
