NetApp AltaVault Cloud Integrated Storage Administration Guide 83
Beta Draft
Managing user permissions Configuring security settings
SMB
NFS
OST
SnapMirror
Configuring permissions for user roles
You can specify the following permissions for each role:
Deny - You cannot view settings or make configuration changes for a feature.
Read-Only - You can view current configuration settings but not change them.
Read/Write - You can view settings and make configuration changes for a feature.
To configure user permissions
1. Choose Configure > User Permissions.
2. Under Capability-Based Accounts, complete the configuration as described in this table.
3. Under Role-Based Accounts, complete the configuration as described in this table.
Control Description
admin/monitor Click the magnifying glass icon to change the administrator or monitor password.
Enable Account - Click the check box to enable or disable the administrator or monitor account.
Change Password - Select the check box to change password protection.
• New Password - Specify a password in the text box. The password cannot be “password” or any
case combination of “password” for any user including admin and root. You will be prompted
with the following message: Password “password” and its case combinations are not allowed.
The password must be at least 6 characters long.
• New Password Confirm - Confirm the new administrator password.
Control Description
Add a New User Click to display the controls for creating a new role-based account.
Account Name Specify a name for the role-based account.
Note: If you are creating a user role for management login from the Active Directory domain, the
name you enter must be the same as the user name in the Active Directory.
Password Specify the new password. The password cannot be “password” or any case combination of
“password” for any user including admin and root and must be at least 6 characters long.
This password can be different from the AD password.
New Password Confirm Confirm the new password.
To Next Page
Loading...
