36 NetApp AltaVault Cloud Integrated Storage Administration Guide
Beta Draft
Configuring storage settings Configuring cloud settings
Configuring encryption
The new datastore encryption key can be generated or imported from an existing one.
To secure the encryption key, protect it using a key passphrase. This passphrase will be used to encrypt the datastore
encryption key and must be provided whenever importing this datastore encryption key, such as for disaster recovery.
It is not stored within a configuration archive and must be kept in a secure location.
For more information on encryption, see “Using the Cloud Settings wizard” on page 22.
Configuring replication
Replication is the process of copying data and metadata from the AltaVault to the cloud. The AltaVault replicates data
to the cloud asynchronously.
Only users who have Read-Only Replication Settings permission or Read and Write Replication Settings permission
can access and configure the Replication Settings Page.
To configure replication
1. Choose Configure > Cloud Settings.
2. Select the Replication tab.
3. Under Replication Settings, complete the configuration as described in this table.
4. Click Apply to complete your changes.
Configuring bandwidth limits
You can limit the bandwidth that the AltaVault uses to replicate data and restore data in the bandwidth limit settings
page.
Only users who have Read-Only Replication Settings permission or Read and Write Replication Settings permission
can access and configure the Bandwidth Limit Settings Page.
To configure bandwidth limits
1. Choose Configure > Cloud Settings.
Control Description
Pause Replication at Specify the time (in HH:MM:SS format) at which you want replication to pause.
Resume Replication at Specify the time (in HH:MM:SS format) at which you want replication to resume.
Bytes pending replication alert limit Displays an alarm if the number of bytes pending replication to the cloud exceeds the
value you specify. The default value is 500 GiB.
Bytes pending replication clear limit Specify the lower limit at which the bytes pending replication alert limit notification is
cleared. The default value is 450 GiB
Suspend Replication Click to temporarily stop replication.
To Next Page
Loading...
