142 NetApp AltaVault Cloud Integrated Storage Administration Guide
Beta Draft
Viewing reports and logs Viewing logs
2. Use the controls in the control panel to customize the report as described in this table.
Viewing logs
The AltaVault log reports provide a high-level view of network activity. You can view both user and system logs.
“Viewing system logs” on page 142
“Viewing user logs” on page 143
Viewing system logs
You can view system logs in the Maintenance > System Logs page. View System logs to monitor system activity and
to troubleshoot problems. The most recent log events are listed first.
To view system logs
1. Choose Maintenance > System Logs.
2. Use the controls to customize the report as described in this table.
Control Description
5m 1h 1d 1w All Select one of the following report time intervals to filter the display:
• 5m - Displays five minutes of data.
• 1h - Displays one hour of data.
• 1d - Displays one day of data.
• 1w - Displays one week of data.
• All - Displays all data available for the past 30 days.
To type a custom time interval, enter the start time and end time (using the format YYYY/MM/DD
HH:MM:SS) in the text field.
You can view the newest data and see data points as they are added to the chart dynamically.
Show newest data Click this option to display only the latest data available. The latest data available depends on the
time interval that you specify. For example, if 1h is the specified time interval, then clicking Show
newest data displays the last 60 minutes of data.
Control Description
Show Select one of the archived logs or Current Log from the drop-down list.
Lines per page Specify the number of lines that you want to display in the page.
Jump to Select one of the following options from the drop-down list:
• Page - Specify the number of the page that you want to display.
• Time - Specify the time for the log that you want to display.
To Next Page
Loading...
