140 NetApp AltaVault Cloud Integrated Storage Administration Guide
Beta Draft
Viewing reports and logs Viewing the disk IOPS report
2. Use the controls in the control panel to customize the report as described in this table.
Viewing the disk IOPS report
The Disk IOPS report displays the average Input/Output Operations Per Second (IOPS) information for each AltaVault
disk.
The Disk IOPS report includes the following statistics.
The Disk IOPS report answers the following questions:
What is the average read IOPS that the AltaVault is experiencing at the specified time?
What is the average write IOPS that the AltaVault is experiencing at the specified time?
The average disk IOPS is a measure of performance that help you to discover disk-based bottlenecks.
To view the Disk IOPS report
1. Choose Reports > Disk IOPS.
Control Description
5m 1h 1d 1w All Select one of the following report time intervals to filter the display:
• 5m - Displays five minutes of data.
• 1h - Displays one hour of data.
• 1d - Displays one day of data.
• 1w - Displays one week of data.
• All - Displays all data available for the past 30 days.
To type a custom time interval, enter the start time and end time (using the format YYYY/MM/DD
HH:MM:SS) in the text field.
You can view the newest data and see data points as they are added to the chart dynamically.
Show newest data Click this option to display only the latest data available. The latest data available depends on the
time interval that you specify. For example, if 1h is the specified time interval, then clicking Show
newest data displays the last 60 minutes of data.
Field Description
Read Average value of input/output operations per second for read operations
from the AltaVault internal disk subsystem.
Write Average value of input/output operations per second for write operations to
the AltaVault internal disk subsystem.
To Next Page
Loading...
