192 NetApp AltaVault Cloud Integrated Storage Administration Guide
Beta Draft
System components AVA-400, AVA-800 Power supplies and their LEDs
Locations and descriptions of system LEDs
Each AC power supply has two LEDs on its faceplate that display the status of the power supply. The image below
displays the location of these LEDs.
The following table displays information about the power supply LEDs:
The following table describes the behavior of the power supply LEDs. These LEDs help monitor the status of the
power supply:
The following table summarizes the specifications of the AC power supplies used in AltaVault systems:
Component Description
1Power LED
2 Attention LED
Icon LED Color Description Corrective action
Power supply attention LED Amber
Clear (off)
The power supply module
is not working properly.
No errors.
Remove the faulty fan module
and install a replacement
module.
None.
Description Value
AC input power frequency 50 to 60 Hz
AC input power voltage/operating range (auto-ranging) 100 to 120 VAC
200 to 240 VAC
AC output power 1300 W
PSU output power 1050W
To Next Page
Loading...
