NetApp AltaVault AVA400 - Page 41

NetApp AltaVault Cloud Integrated Storage Administration Guide 41
Beta Draft
Configuring SMB Configuring storage settings
To add local SMB user
1. To add SMB user to access the share that you created, complete the configuration as described in this table.
To edit SMB local user
1. Extend the user name to complete the configuration as described in this table.
To edit multichannel settings
SMB multichannel is a feature that allows SMBv3 shares to be accessed via multiple network interfaces from Windows
hosts that support SMBv3.
1. Multichannel support is disabled for all interfaces by default. To enable an interface (e0a, e0b, e0c), select the
checkbox for the interface and click Enable.
Control Description
Add SMB User Displays the controls to add a user to the SMB share.
User Name Specify the user name of a local user to access the SMB share. The user name is case
sensitive.
Password Specify the password for the new user.
Password Confirm Re-enter the new password for the new user.
Admin Select one of the following options from the drop-down list:
• Yes - Provides Administrator privileges to user
• No - Disables Administrator privileges to user
Account Select one of the following options from the drop-down list:
• Enabled - Enables local user account for accessing SMB share
• Disabled - Disables local user account from accessing SMB share
Remove Selected Removes local SMB user configuration.
Add Adds local SMB user.
Control Description
Change Password Select the check box to change the password.
Password Specify the new password for the user.
Password Confirm Re-enter the new password for the user.
Admin Select one of the following options from the drop-down list:
• Yes - Provides Administrator privileges to user
• No - Disables Administrator privileges to user
Account Select one of the following options from the drop-down list:
• Enabled - Enables local user account for accessing SMB share
• Disabled - Disables local user account from accessing SMB share
Remove Selected Deletes the selected user from the SMB server.
Apply Applies the changes to the SMB share users.