70 NetApp AltaVault Cloud Integrated Storage Administration Guide
Beta Draft
Configuring system administrator settings Configuring SNMP basic settings
2. Under Users, complete the configuration as described in this table.
.
3. Click Apply to apply your changes to the running configuration.
Control Description
Add a New User Displays the controls to add a new user.
User Name Specify the username.
Authentication Protocol Select an authentication method from the drop-down list:
• MD5 - Specifies the Message-Digest 5 algorithm, a widely used cryptographic hash function
with a 128-bit hash value. This is the default value.
• SHA - Specifies the Secure Hash Algorithm, a set of related cryptographic hash functions. SHA
is considered to be the successor to MD5.
Authentication Optionally, select either Supply a Password or Supply a Key to use while authenticating users.
Password/Password
Confirm
Specify a password. The password must have a minimum of eight characters. Confirm the
password in the Password Confirm text box.
The password cannot be “password.”
MD5 Key (Appears only when you select Supply A Key). Specify a unique authentication key. The key is a
MD5 or SHA-1 digest created using md5sum or sha1sum.
Privacy MD5/SHA Key (Appears only when you select v3 and Privacy as Supply a Key). Specify the privacy
authentication key. The key is either a 32-hexadecimal digit MD5 or a 40-hexadecimal digit SHA
digest created using md5sum or sha1sum.
Use Privacy Option Privacy Protocol - Select the privacy protocol from the drop-down list. Choose AES or DES.
Privacy - Select the privacy option from the drop-down list. Choose Same as Authentication,
Supply a Password, or Supply a Key.
Add Adds the user.
Remove Selected Select the check box next to the name and click Remove Selected.
To Next Page
Loading...
