NetApp AltaVault AVA400 - Page 75

NetApp AltaVault Cloud Integrated Storage Administration Guide 75
Beta Draft
Configuring log settings Configuring system administrator settings
You can also schedule a log rotation based on time or the amount of disk space the log uses, described next.
3. Under Logging Configuration, complete the configuration as described in this table.
4. Click Apply to apply your changes to the running configuration.
To add or remove a log server
1. Under Remote Log Servers, complete the configuration as described in this table.
Control Description
Minimum Severity Select the minimum severity level for the system log messages. The log contains all messages with
this severity level or higher. Select one of the following levels from the drop-down list:
• Emergency - Emergency, the system is unusable.
• Alert - Action must be taken immediately.
• Critical - Conditions that affect the functionality of the AltaVault.
• Error - Conditions that probably affect the functionality of the AltaVault.
• Warning - Conditions that could affect the functionality of the AltaVault, such as authentication
failures.
• Notice - Normal but significant conditions, such as a configuration change.
• Info - Informational messages that provide general information about system operations. This is
the default setting.
This control applies to the system log only. It does not apply to the user log.
Maximum Number of
Log Files
Specify the maximum number of logs to store. The default value is 10.
Lines Per Log Page Specify the number of lines displayed per page when viewing the logs. The default value is 100.
Rotate Based On Specifies the rotation option:
• Time - Select Day, Week, or Month from the drop-down list. The default setting is Day.
• Disk Space - Specify how much disk space, in megabytes, the log uses before it rotates. The
default value is 16 MB.
The log file size is checked at 10-minute intervals. If there is an unusually large amount of logging
activity, it is possible for a log file to grow larger than the set disk space limit in that period of time.
Control Description
Add a New Log Server Displays the controls for configuring new log servers.
Server IP Specify the server IP address.