80 NetApp AltaVault Cloud Integrated Storage Administration Guide
Beta Draft
Configuring security settings Configuring general security settings
2. Under Authentication Methods, complete the configuration as described in this table.
3. Click Apply to apply your changes to the running configuration.
Control Description
Authentication Methods Select an authentication method from the drop-down list. The methods are listed in the
order in which they occur. If authorization fails on the first method, the next method is
attempted until all of the methods have been attempted.
Note: Prior to selecting the Kerberos/AD Only method, the AltaVault must have joined
the AD domain and have created an administrator user account.
For RADIUS/TACACS+, fallback
only when servers are unavailable
Specifies that the AltaVault uses a RADIUS or TACACS+ server only when all other
servers do not respond. Enabled is the default setting.
Authorization Policy Appears only for some Authentication Methods. Optionally, select one of the following
policies from the drop-down list:
• Remote First - Checks for an authentication policy on the remote server first and only
checks locally if the remote server does not have a policy set.
• Remote Only- Only check the remote server. This is the default.
• Local Only - Checks only the local server. All remote users are mapped to the user
specified. Any vendor attributes received by an authentication server are ignored.
Default User Optionally, select Admin or Monitor from the drop-down list to define the default
authentication policy.
To Next Page
Loading...
