98 NetApp AltaVault Cloud Integrated Storage Administration Guide
Beta Draft
Configuring security settings Configuring appliance monitoring
2. Choose Configure > REST API Access.
3. To enable access to the REST APIs, under REST API Access Settings, select the Enable REST API Access check
box.
4. Click Apply.
5. Complete the configuration as described in the table.
The added access code description appears in the Access Code Description table, along with the name of the user
who created it.
6. Click the Access Code Description.
7. Copy the Access Code from the text field into a text editor, such as Notepad.
To specify the API access code in the monitoring appliance
1. Log in to the monitoring AltaVault appliance.
2. Choose Reports > Appliance Monitoring.
3. Complete the configuration as described in this table.
Control Description
Add Access Code Displays the controls to generate the API access code.
Description of Use Specify a clear description of the monitoring appliance such as the hostname or IP
address of the monitoring master appliance and a description such as “monitoring
appliance.”
Generate New Access Code Generates the new access code.
Use Existing Access Code Select to use an existing REST API access code. When you are monitoring multiple
appliances, you can use the same access code instead of creating a new one for each
appliance.
Add Adds the API access code to the AltaVault.
Remove Selected Select an access code description from the table below and click Remove Selected to
delete the selected REST API access code.
Control Description
Add Monitored Appliance Displays the controls to add a monitored appliance.
Hostname or IP address Specify a valid hostname or IP address for the monitored appliance.
API Access Code Specify the API access code that you obtained from the monitored appliance as
specified in “To configure REST API Access” on page 97.
Add Adds the API access code to the AltaVault appliance.
Remove Selected Appliances Select an access code from the table below and click Remove Selected Appliances to
delete the selected REST API access code.
To Next Page
Loading...
