NETGEAR GSM7228PS - Page 160

Rule Number: 3
Action......................................... permit
Protocol....................................... 6(tcp)
Source IP Address.............................. 2001:DB8:C0AB:AC11::/64
Destination L4 Port Keyword.................... 80(www/http)
160 | Chapter 10. ACLs
ProSafe 7000 Managed Switch Release 8.0.3
Web Interface: Configure an IPv6 ACL
1. Create the access control list with the name ipv6-acl
a. Select Security > ACL > Advanced > IPv6 ACL.
b. In the IPv6 ACL Table, in the IPv6 ACL field, enter ipv6-acl . A screen similar to the
following displays.
c. Click Add. A screen similar to the following displays.
2. Define the first rule (1 of 3).
a. Select Security > ACL > Advanced > IPv6 Rules. A screen similar to the following
displays.
b. In the ACL Name list, select ipv6-acl.