Chapter 12. DiffServ | 197
ProSafe 7000 Managed Switch Release 8.0.3
a. Select QoS > DiffServ > Advanced > Service Configuration. A screen similar to the
following displays.
b. Scroll down and select the Interface 1/0/2 check box. Now 1/0/2 appears in the
Interface field at the top.
c. In the Policy In list, select pol_voip.
d. Click Apply to create a new policy.
Auto VoIP
The Auto-VoIP feature makes it easy to set up VoIP for IP phones on a switch. This
functionality copies VoIP signaling packets to the CPU to get the source and destination IP
address and Layer 4 port of the current session. Based on these parameters a filter is
To Next Page
Loading...
