NETGEAR GSM7228PS - Enter Static Binding into the Binding Database

Chapter 14. Security Management | 265
ProSafe 7000 Managed Switch Release 8.0.3
d. Click Apply. A screen similar to the following displays.
4. View the DHCP Snooping Binding configuration.
Select Security > Control > DHCP Snooping Binding Configuration. A screen similar
to the following displays.
Enter Static Binding into the Binding Database
You can also enter the static binding into the binding database.
CLI: Enter Static Binding into the Binding Database
1. Enter the DHCP snooping static binding.
(Netgear Switch) (Config)# ip dhcp snooping binding 00:11:11:11:11:11
vlan 1 192.168.10 .1 interface 1/0/2