Chapter 28. MLD | 439
ProSafe 7000 Managed Switch Release 8.0.3
Configure MLD
In this case, PIM-DM is enabled on Switch A and Switch B, and MLD is enabled on Switch
B’s port 1/0/24 to discover the multicast listeners.
IPv6 multicast source
2001:2::/65
Port 1/0/13
Port 1/0/1
2001:1::/64
Port 1/0/21
Port 1/0/24
2001:3::/64
Host
Switch A
Switch B
Figure 1. Configure MLD
CLI: Configure MLD
MLD on Switch A
(Netgear Switch) #configure
(Netgear Switch) (Config)#ipv6 router ospf
(Netgear Switch) (Config-rtr)#router-id 1.1.1.1
(Netgear Switch) (Config)#exit
To Next Page
Loading...
