132 | Chapter 10. ACLs
ProSafe 7000 Managed Switch Release 8.0.3
c. Click Add.
5. Create a static route with IP address 192.168.30.0/24:
a. Select Routing > Routing Table > Basic > Route Configuration. A screen similar to
the following displays.
b. Under Configure Routes, make the following selection and enter the following
information:
• In the Route Type field, select Static.
• In the Network Address field, enter 192.168.30.0.
• In the Subnet Mask field, enter 255.255.255.0.
• In the Next Hop IP Address field, enter 192.168.200.1.
c. Click Add.
Use ACLs to Configure Isolated VLANs on a Layer 3 Switch
This example shows how to isolate VLANs on a Layer 3 switch by using ACLs. In this
example, PC 1 is in VLAN 24, PC 2 is in VLAN 48, and the server is in VLAN 38. PC 1 and
To Next Page
Loading...
