NETGEAR GSM7228PS - Page 162

162 | Chapter 10. ACLs
ProSafe 7000 Managed Switch Release 8.0.3
h. In the Destination L4 Port list, select telnet. A screen similar to the following
displays.
i. Click Apply.
4. Add Rule 3.
a. In the Rule ID field, enter 3.
b. For Action, select the Permit radio button.
c. In the Protocol Type list, select TCP.
d. In the Source Prefix field, enter 2001:DB8:C0AB:AC11::.
e. In the Source Prefix Length field, enter 64.
f. In the Destination L4 Port list, select http. A screen similar to the following
displays.
g. Click Apply.
5. Apply the rules to inbound traffic on port 1/0/1. Only traffic matching the criteria will be
accepted.
a. Select Security > ACL > Advanced > IP Binding Configuration.