Chapter 12. DiffServ | 177
ProSafe 7000 Managed Switch Release 8.0.3
assign-queue attribute. It is presumed that the switch will forward this traffic to interface 1/0/5
based on a normal destination address lookup for Internet traffic.
(Netgear Switch) (Config)#interface 1/0/5
(Netgear Switch) (Interface 1/0/5)#cos-queue min-bandwidth 0 25 25 25 25 0 0 0
(Netgear Switch) (Interface 1/0/5)#exit
(Netgear Switch) (Config)#exit
Web Interface: Configure DiffServ
1. Enable Diffserv.
a. Select QoS > DiffServ > Basic > DiffServ Configuration. A screen similar to the
following displays.
b. For Diffserv Admin Mode, select the Enable radio button.
c. Click Apply to save the settings.
2. Create the class finance_dept.
a. Select QoS > DiffServ > Advanced > Class Configuration. A screen similar to the
following displays.
b. Enter the following information:
• In the Class Name field, enter finance_dept.
• In the Class Type list, select All.
c. Click Add to create a new class finance_dept.
To Next Page
Loading...
