192 | Chapter 12. DiffServ
ProSafe 7000 Managed Switch Release 8.0.3
Web Interface: Diffserv for VoIP
1. Set queue 5 on all interfaces to use strict mode.
a. Select QoS > CoS > Advanced > CoS Interface Configuration. A screen similar to
the following displays.
b. Under Interface Queue Configuration, select all the interfaces.
c. In the Queue ID list, select 5.
d. In the Scheduler Type list, select Strict.
e. Click Apply to save the settings.
2. Enable DiffServ.
a. Select QoS > DiffServ > Basic > DiffServ Configuration. A screen similar to the
following displays.
b. For Diffserv Admin Mode, select the Enable radio button.
c. Click Apply to save the settings.
3. Create a class class_voip.
To Next Page
Loading...
