NETGEAR GSM7228PS - Page 199

Chapter 12. DiffServ | 199
ProSafe 7000 Managed Switch Release 8.0.3
2. View the auto VoIP information:
(Netgear Switch) # show auto-voip interface all
Interface Auto VoIP Mode Traffic Class
--------- -------------- -------------
1/0/1 Enabled 6
1/0/2 Enabled 6
1/0/3 Enabled 6
1/0/4 Enabled 6
1/0/5 Enabled 6
1/0/6 Enabled 6
1/0/7 Enabled 6
1/0/8 Enabled 6
1/0/9 Enabled 6
1/0/10 Enabled 6
1/0/11 Enabled 6
1/0/12 Enabled 6
1/0/13 Enabled 6
1/0/14 Enabled 6
1/0/15 Enabled 6
1/0/16 Enabled 6
1/0/17 Enabled 6
1/0/18 Enabled 6
1/0/19 Enabled 6
1/0/20 Enabled 6
--More-- or (q)uit
Interface Auto VoIP Mode Traffic Class
--------- -------------- -------------
1/0/21 Enabled 6
1/0/22 Enabled 6
1/0/23 Enabled 6
1/0/24 Enabled 6
1/0/25 Enabled 6
1/0/26 Enabled 6
1/0/27 Enabled 6
1/0/28 Enabled 6
Auto VoIP classifies and prioritizes the packets and places only the packets in the
higher-priority queue. In the previous example, ithey are placed in queue 6. You can override
the egress queue setting using the commands cos-queue strict or cos-queue min-bandwidth
if you want.