Chapter 12. DiffServ | 209
ProSafe 7000 Managed Switch Release 8.0.3
means these packets will be the last packets to be dropped in the event of congestion
beyond the policed rate.
(Netgear Switch) (Config)#policy-map policy_vlan in
(Netgear Switch) (Config-policy-map)#class class_vlan
(Netgear Switch) (Config-policy-classmap)#police-simple 1000 64 conform-action transmit
violate-action drop
(Netgear Switch) (Config-policy-classmap)#conform-color class_color
(Netgear Switch) (Config-policy-classmap)#exit
(Netgear Switch) (Config-policy-map)#exit
4. Apply this policy to port 1/0/13.
(Netgear Switch) (Config)#interface 1/0/13
(Netgear Switch) (Interface 1/0/13)#service-policy in policy_vlan
(Netgear Switch) (Interface 1/0/13)#exit
(Netgear Switch) (Config)#exit
Web Interface: Configure a Color Conform Policy
1. Create a VLAN.
a. Select Switching > VLAN > Basic > VLAN Configuration. A screen similar to the
following displays.
b. In the VLAN ID field, enter 5.
c. Click Add.
2. Add ports 1/0/13 and 1/0/25 to VLAN 5.
To Next Page
Loading...
