NETGEAR GSM7228PS - Page 223

Chapter 13. IGMP Snooping and Querier | 223
ProSafe 7000 Managed Switch Release 8.0.3
address in querier packets. See the Command Line Reference for more details about other
IGMP querier command options.
(Netgear switch) #vlan database
(Netgear switch) (vlan)#set igmp 1
(Netgear switch) (vlan)#set igmp querier 1
(Netgear switch) (vlan)#exit
(Netgear switch) #config
(Netgear switch) (config)#set igmp querier
(Netgear switch) (config)#set igmp querier address 10.10.10.1
(Netgear switch) (config)#exit
Web Interface: Enable IGMP Querier
1. Select Switching > Multicast > IGMP VLAN Configuration. A screen similar to the
following displays.
2. Enable IGMP snooping on VLAN 1.
a. Select Switching > Multicast > IGMP Snooping > IGMP VLAN Configuration. A
screen similar to the following displays.
b. Enter the following information:
• In the VLAN ID field, enter 1.
• In the Admin Mode field, select Enable.