NETGEAR GSM7228PS - Page 228

228 | Chapter 14. Security Management
ProSafe 7000 Managed Switch Release 8.0.3
Web Interface: Set the Dynamic and Static Limit on Port 1/0/1
1. Select Security > Traffic Control > Port Security >Port Administrator. A screen
similar to the following displays.
c. Under Port Security Configuration, next to Port Security Mode, select the Enable
radio button.
d. Click Apply to save the settings.
2. Set the dynamic and static limit on the port 1/0/1:
a. Select Security > Traffic Control > Port Security >Interface Configuration. A
screen similar to the following displays.
b. Scroll down and select the Interface 1/0/1 check box. Now 1/0/1 appears in the
Interface field at the top.
c. Enter the following information:
• In the Port Security field, select Enable.
• In the Max Allowed Dynamically Learned MAC field, enter 10.
• In the Max Allowed Statically Locked MAC field, enter 3.
d. Click Apply to save the settings.