258 | Chapter 14. Security Management
ProSafe 7000 Managed Switch Release 8.0.3
d. Click Apply. A screen similar to the following displays.
4. View the DHCP Snooping Binding table.
a. Select Security > Control > DHCP Snooping Binding Configuration. A screen
similar to the following displays.
5. Enable ARP Inspection in VLAN 1.
a. Select Security > Control > Dynamic ARP Inspection > DAI VLAN Configuration.
A screen similar to the following displays.
b. In the VLAN ID field, enter 1.
To Next Page
Loading...
