276 | Chapter 15. SNTP
ProSafe 7000 Managed Switch Release 8.0.3
command to confirm that the time has been received. The time will be used in all logging
messages.
(Netgear Switch) #show sntp server
Server IP Address: 208.14.208.19
Server Type: ipv4
Server Stratum: 4
Server Reference Id: NTP Srv: 208.14.208.3
Server Mode: Server
Server Maximum Entries: 3
Server Current Entries: 1
SNTP Servers
------------
IP Address: 208.14.208.19
Address Type: IPV4
Priority: 1
Version: 4
Port: 123
Last Update Time: Mar 26 03:36:09 2006
Last Attempt Time: Mar 26 03:36:09 2006
Last Update Status: Success
Total Unicast Requests: 2
Failed Unicast Requests: 0
Web Interface: Configure SNTP
1. Configure the SNTP server.
a. Select System > Management >Time > SNTP Server Configuration. A screen
similar to the following displays.
b. Enter the following information:
To Next Page
Loading...
