NETGEAR GSM7228PS - Page 281

Chapter 16. Tools | 281
ProSafe 7000 Managed Switch Release 8.0.3
CLI: Traceroute
(Netgear Switch) #traceroute?
<ipaddr> Enter IP address.
(Netgear Switch) #traceroute 216.109.118.74 ?
<cr> Press Enter to execute the command.
<port> Enter port no.
(Netgear Switch) #traceroute 216.109.118.74
racing route over a maximum of 20 hops
1 10.254.24.1 40 ms 9 ms 10 ms
2 10.254.253.1 30 ms 49 ms 21 ms
3 63.237.23.33 29 ms 10 ms 10 ms
4 63.144.4.1 39 ms 63 ms 67 ms
5 63.144.1.141 70 ms 50 ms 50 ms
6 205.171.21.89 39 ms 70 ms 50 ms
7 205.171.8.154 70 ms 50 ms 70 ms
8 205.171.8.222 70 ms 50 ms 80 ms
9 205.171.251.34 60 ms 90 ms 50 ms
10 209.244.219.181 60 ms 70 ms 70 ms
11 209.244.11.9 60 ms 60 ms 50 ms
12 4.68.121.146 50 ms 70 ms 60 ms
13 4.79.228.2 60 ms 60 ms 60 ms
14 216.115.96.185 110 ms 59 ms 70 ms
15 216.109.120.203 70 ms 66 ms 95 ms
16 216.109.118.74 78 ms 121 ms 69 ms