NETGEAR GSM7228PS - Page 284

284 | Chapter 16. Tools
ProSafe 7000 Managed Switch Release 8.0.3
script apply running-config.scr
(Netgear Switch) #script apply running-config.scr
Are you sure you want to apply the configuration script? (y/n) y
The system has unsaved changes.
Would you like to save them now? (y/n) y
Configuration Saved!
Create a Configuration Script
(Netgear Switch) #show running-config running-config.scr
Config script created successfully.
(Netgear Switch) #script list
Configuration Script Name Size(Bytes)
------------------------- ----------
running-config.scr 3201
1 configuration script(s) found.
1020799 bytes free.
Upload a Configuration Script
(Netgear Switch) #copy nvram: script running-config.scr
tftp://192.168.77.52/running-config.scr
Mode......................... TFTP
Set TFTP Server IP........... 192.168.77.52
TFTP Path.................... ./
TFTP Filename................ running-config.scr
Data Type.................... Config Script
Source Filename.............. running-config.scr
Are you sure you want to start? (y/n) y
File transfer operation completed successfully.