30 | Chapter 2. VLANs
ProSafe 7000 Managed Switch Release 8.0.3
c. In the Class Type list, select All. A screen similar to the following displays.
d. Click Add. The Class Name screen displays, as shown in the next step in this
procedure.
6. Configure matching criteria for the class as VLAN 10.
a. Select QoS > DiffServ > Advanced > Class Configuration. A screen similar to the
following displays.
b. Click the class ClassVoiceVLAN. A screen similar to the following displays.
c. In the DiffServ Class Configuration table, select VLAN.
d. In the VLAN ID field, enter 10. A screen similar to the following displays.
To Next Page
Loading...
