NETGEAR GSM7228PS - Page 355

Chapter 23. Spanning Tree Protocol | 355
ProSafe 7000 Managed Switch Release 8.0.3
• In the VLAN Id field, enter 2.
• Click Add.
• In the VLAN Id field, enter 3.
• Click Apply.
c. Configure MST ID 2.
• In the MST ID field, enter 2.
• In the Priority field, enter 4096.
• In the VLAN Id field, enter 11.
• Click Add.
• In the VLAN Id field, enter 12.
• Click Apply.
3. Configure the MST port.
a. Select Switching > STP > MST Port Status. A screen similar to the following
displays.
4. Under MST Port Configuration, scroll down and select the Interface 1/0/3 check box. Now
1/0/3 appears in the Interface field at the top.
5. Enter the following information:
• In the Port Priority field, enter 128.
• In the Port Path Cost field, enter 0.
6. Click Apply.