370 | Chapter 25. IPv6 Interface Configuration
ProSafe 7000 Managed Switch Release 8.0.3
Web Interface: Create an IPv6 VLAN Routing Interface
1. Create VLAN 500.
a. Select Switching > VLAN > Basic > VLAN Configuration. A screen similar to the
following displays.
b. In the VLAN ID field, enter 500.
c. In the VLAN Type field, select Static.
d. Click Add.
2. Add ports to VLAN 500.
a. Select Switching > VLAN > Advanced > VLAN Membership. A screen similar to the
following displays.
b. In the VLAN ID list, select 500.
c. Click Unit 1. The ports display.
d. Click the gray box under port 1 until U displays, indicating that the egress packet is
untagged for the port.
e. Click Apply.
3. Specify the PVID on port 1/0/1.
To Next Page
Loading...
