NETGEAR GSM7228PS - Page 399

(Netgear Switch) (Interface 1/0/1)#ip pimsm
(Netgear Switch) (Interface 1/0/1)#exit
(Netgear Switch) (Config)#interface 1/0/9
(Netgear Switch) (Interface 1/0/9)#routing
(Netgear Switch) (Interface 1/0/9)#ip address 192.168.3.1 255.255.255.0
(Netgear Switch) (Interface 1/0/9)#ip rip
(Netgear Switch) (Interface 1/0/9)#ip pimsm
(Netgear Switch) (Interface 1/0/9)#exit
(Netgear Switch) (Config)#interface 1/0/13
(Netgear Switch) (Interface 1/0/13)#routing
(Netgear Switch) (Interface 1/0/13)#ip address 192.168.1.2 255.255.255.0
(Netgear Switch) (Interface 1/0/13)#ip rip
(Netgear Switch) (Interface 1/0/13)#ip pimsm
(Netgear Switch) (Interface 1/0/1)#exit
Chapter 26. PIM | 399
ProSafe 7000 Managed Switch Release 8.0.3
PIM-SM on Switch B
1. Enable the switch to advertise itself as a PIM candidate rendezvous point (RP) to the
bootstrap router (BSR).
(Netgear Switch)#configure
(Netgear Switch) (Config)#ip routing
(Netgear Switch) (Config)#ip pimsm
(Netgear Switch) (Config)#ip multicast
(Netgear Switch) (Config)#ip pimsm rp-candidate interface 1/0/11 225.1.1.1 255.255.255.0
2. Enable the switch to announce its candidacy as a bootstrap router (BSR).
(Netgear Switch) (Config)#ip pimsm bsr-candidate interface 1/0/10 30 7
(Netgear Switch) (Config)#interface 1/0/10
(Netgear Switch) (Interface 1/0/10)#routing
(Netgear Switch) (Interface 1/0/10)#ip address 192.168.3.2 255.255.255.0
(Netgear Switch) (Interface 1/0/10)#ip rip
(Netgear Switch) (Interface 1/0/10)#ip pimsm
(Netgear Switch) (Interface 1/0/10)#exit
(Netgear Switch) (Config)#interface 1/0/11
(Netgear Switch) (Interface 1/0/11)#routing
(Netgear Switch) (Interface 1/0/11)#ip address 192.168.5.1 255.255.255.0
(Netgear Switch) (Interface 1/0/11)#ip rip
(Netgear Switch) (Interface 1/0/11)#ip pimsm
(Netgear Switch) (Interface 1/0/11)#exit