406 | Chapter 26. PIM
ProSafe 7000 Managed Switch Release 8.0.3
b. For Admin Mode, select the Enable radio button.
c. Click Apply.
10. Enable PIM-SM on interfaces 1/0/1,1/0/9, and 1/0/13.
a. Select Routing > Multicast > PIM-SM > Interface Configuration. A screen similar to
the following displays.
b. Scroll down and select the Interface 1/0/1, 1/0/9, and 1/0/13 check boxes.
c. In the Admin Mode field, select Enable.
d. Click Apply to save the settings.
To Next Page
Loading...
