416 | Chapter 26. PIM
ProSafe 7000 Managed Switch Release 8.0.3
a. Select Routing > Multicast > PIM-SM > Candidate RP Configuration. A screen
similar to the following displays.
b. In the Interface list, welect 1/0/22.
c. In the Group IP field, enter 225.1.1.1.
d. In the Group Mask field, enter 255.255.255.0.
e. Click Add.
10. BSR Candidate Configuration.
a. Select Routing > Multicast > PIM-SM > BSR Candidate Configuration. A screen
similar to the following displays.
b. In the Interface list, select the 1/0/21.
c. In the Hash Mask Length field, enter 30.
d. In the Priority field, enter 5.
To Next Page
Loading...
