422 | Chapter 26. PIM
ProSafe 7000 Managed Switch Release 8.0.3
a. Select Routing > Multicast > PIM-SM > BSR Candidate Configuration. A screen
similar to the following displays.
b. In the Interface list, select 1/0/22.
c. In the Hash Mask Length field, enter 30.
d. In the Priority field, enter 3.
e. Click Apply.
13. Enable IGMP globally.
a. Select Routing > Multicast > IGMP > Global Configuration. A screen similar to the
following displays.
b. For Admin Mode, select the Enable radio button.
c. Click Apply.
14. Enable IGMP on interface 1/0/24.
To Next Page
Loading...
