Chapter 29. DVMRP | 469
ProSafe 7000 Managed Switch Release 8.0.3
a. Select Routing > Multicast > Global Configuration. A screen similar to the
following displays.
b. For Admin Mode, select the Enable radio button.
c. Click Apply.
5. Enable DVMRP on the switch.
a. Select Routing > Multicast > DVMRP> Global Configuration. A screen similar to
the following displays.
b. For Admin Mode, select the Enable radio button.
c. Click Apply.
6. Enable DVMRP on the interface.
To Next Page
Loading...
