Chapter 29. DVMRP | 473
ProSafe 7000 Managed Switch Release 8.0.3
a. Select Routing > Multicast > DVMRP > Global Configuration. A screen similar to
the following displays.
b. For Admin Mode, select the Enable radio button.
c. Click Apply.
7. Enable DVMRP on the interface.
a. Select Routing > Multicast > DVMRP > Interface Configuration. A screen similar
to the following displays.
b. Scroll down and select the Interface 1/0/3, 1/0/11, and 1/0/24 check boxes.
c. Select Enable in the Interface Mode field.
d. Click Apply to save the settings.
8. Enable IGMP on the switch.
To Next Page
Loading...
