NETGEAR GSM7228PS - Page 59

Chapter 6. RIP | 59
ProSafe 7000 Managed Switch Release 8.0.3
Web Interface: Enable RIP for Ports 1/0/2 and 1/0/3
1. Select Routing > RIP > Advanced > RIP Configuration. A screen similar to the
following displays.
2. Enter the following information:
• In the Interface field, select 1/0/2.
• For RIP Admin Mode, select the Enable radio button.
• In the Send Version field, select RIP-2.
3. Click Apply to save the settings.
4. Select Routing > RIP > Advanced > RIP Configuration. A screen similar to the following
displays.
5. Enter the following information:
• In the Interface field, select 1/0/3.
• For RIP Admin Mode, select the Enable radio button.
• In the Send Version list, select RIP-2.