MX Series Voice Gateway User Manual
New Rock Technologies, Inc. 83
Table 2-30 Greeting Configuration Parameters
Second Stage
Dialing
Configuration(Appl
icable for FXO
port)
Click Browse, and then select the local audio file named welcome.wav. Click Upload. The
uploaded audio file overwrites the original one.
If you want to delete the current customized second stage dialing tone, click Delete. After the
gateway restarts, the default second stage dialing tone will be used.
Click Browse, and then select the local audio file named fring1/2/3/4/5/6/7/8/9.wav. Click
Upload. The uploaded audio file overwrites the original one.
If you want to delete the current color ringback tone, you can click Delete. After the gateway
restarts, the default color ringback tone will be used.
2.6.9 Call Progress Tone Plan
After login, click Advanced > Tones to open this interface.
Figure 2-52 Call Progress Tone Configuration Interface
Table 2-31 Call Progress Tone Configuration Parameters
There are progress tone plans for several countries and regions that are pre-programmed in
gateways. Users may also specify the tone plan according to the national standard. Gateways
provide tone plans for the following countries and regions:
China, the United States, France, Italy, Germany, Mexico, Chile, Russia, Japan, South Korea, Hong
Kong, Taiwan, India, Sudan, Iran, Algeria, Pakistan, Philippines, Kazakhstan, Singapore, Israel,
Malaysia, Indonesia, United Arab Emirates, Zimbabwe, Australia.
User-defined: define the call progress tones by yourself.
Prompt tone of off-hook dial tone.
Prompt of voice mail, or when the subscriber line is set with “Do not Disturb Service and Call
Transfer”.
To Next Page
Loading...
Need help?
General
