New Rock Technologies MX series User Manual

User Manual MX Series Voice Gateway
94 New Rock Technologies, Inc.
Figure 2-58 Brute Force Login Prevention (Lockout IP Addresses) Interface
Table 2-36 Brute Force Login Prevention (Lockout IP Addresses) Information
Name
Description
IP address
Indicates a locked IP address.
Date
Indicates the date when an IP address is locked.
Services
Indicates the login method of the locked IP address (Web or SSH).
You may perform the following maintenance operation:
 Delete : Remove the IP address from the locked list.
2.7.4 ACL-based Traffic Filtering
Access Control List (ACL) based filtering provides predictable traffic filtering. You can configure filtering
rules to allow or deny receiving packets from specified IP addresses to certain ports on the device. For
example, if a remote host (with the IP address x.x.x.x) allowed to connect to a certain service using port X,
create an ACCEPT rule to allow traffic from IP x.x.x.x destined to port X on MX.
After login, choose Security > Static defense to go to the configuration interface.
Figure 2-59 Static Defense Configuration Interface
Table 2-37 Static Defense Configuration Parameters
Name
Description
Accept/Block
Specify whether to receive or block data packets when the specified conditions are matched
(source IP address, local port, protocol).
Local port
Specify the local port range of the device for receiving data packets.
Range is 0 to 65535.

New Rock Technologies MX series Specifications

General

Brand	New Rock Technologies
Model	MX series
Category	Gateway
Language	English