User Manual MX Series Voice Gateway
86 New Rock Technologies, Inc.
The feature code for deactivating call forwarding on busy, with default of #61.
User operation: off hook → press #61 → hang up.
The feature code for activating call forwarding on no answer, with default of *62. Dialing the
feature code should activate call forwarding on no answer and specify destination number.
Note: It is required to enable call forwarding on no answer service before using this function
(See 2.3.2 Subscriber Line Features).
The feature code for deactivating call forwarding on no answer, with default of #62.
The feature code for activating color ringback tone, with default of *80. Subscribers may
select their favorite color RB tone by using this key.
Note: It is required to start color ring service before using this function (See 2.3.2 Subscriber
Line Features for how to assign the feature to the phone).
User operation: upon off hook, the subscriber may press the feature code (*80 by default), then
input the two-digit index numbers of color ring.
Dial *80* to listen to the color ring that has been previously set.
The feature code for deactivating the color ring, with default of #80. The subscriber may use
such key to recover the normal ring of phone.
User operation: off hook → press #80 → hang up.
The feature code for activating the double-ring/forking feature, with default of *75.
The feature code for deactivating the feature, with default of #75.
Activate do not disturb (DND), with default of *72. With DND selected, the gateway will
reject all coming calls by sending busy tone to the callers.
Note: It is required to start DND prior to using this function (See 2.3.2 Subscriber Line
Features).
The feature code to cancel DND, with default of #72. Dialing the feature code may recover
normal ringing upon the arrival of incoming calls.
Define the feature code of dial, with default of *74. This key allows the user to build a table of
2-digits (20~49) speed-dial numbers.
Note: It is necessary to get the dial-up service under way before applying this function (please
see Phone for instructions on assigning the feature to the phone).
User operation: upon dialing the feature code (*74), dial the two-digit speed dial followed by
the expanded number terminated with #.
The prefix number for applying abbreviated dialing, with default of **. The prefix should be
added in front of abbreviated dialing numbers when using abbreviated dialing.
User operation: off hook → dial the prefix number of abbreviated dialing (**) and dial
abbreviated dialing number (20).
The feature code for cancelling the call waiting feature for next call, with default of *64.
Dialing this feature code will temporarily disable the call waiting function for the next phone
call.
Note: The feature code works only for single cancel, to cancel the call waiting complete,
please refer to Table 2-14 about configuration of subscriber line.
The feature code of blind call transfer, with default of *38.
User operation: during the call, tap the phone hook switch or press R button→ dial *38→ dial
the called number and then hang up.
The feature code for listening to the color ring, with default of *88.
User operation: off hook → press *88 → input color ring number.
While listening, you can press a two-digit CRBT index to change to another CRBT file.
The default value is *79.
To Next Page
Loading...
Need help?
General
