NGTeco K4 - Delete User

NGTeco Time Clock - K4 Model User Manual
Page | 26 Copyright©2021 NGTeco. All rights reserved.
5.2.1 Edit User Details
Figure 5-10: Edit User Details
1. Navigate to the corresponding field and make necessary changes. To add another
fingerprint, navigate to Fingerprint and press <M/OK>. Enroll the fingerprint. Similarly,
navigate to Password and press <M/OK>. Enter the New Password and confirm the
same.
2. Finally, navigate to [Save] and press <M/OK>.
You cannot edit the ID of the user.
5.2.2 Delete User
1. If you require to delete a user permanently, navigate to the corresponding user and
select [Delete User].
Figure 5-11: Delete User