NGTeco Time Clock - K4 Model User Manual
Page | 52 Copyright©2021 NGTeco. All rights reserved.
Figure 8-3: Semi-Monthly Pay Period
• Start Date of First Half Month: The first half of the month is calculated from this
day.
• Start Date of Second Half Month: The second half of the month starts from this
day.
• Start Day of the Week: It means that the start of the week is counted from this
day.
4. Then, press <
> to navigate and set the start day of the first and second half of the
month.
5. Then, press <
> to navigate and set the start day of the week.
6. Navigate to [OK/M to Save] and press <M/OK>.
8.4 Monthly Pay Period
The payroll runs on the same date of every month.
Perform the following steps to set the Monthly Pay Period:
1. Go to [Pay Period].
2. Press <M/OK> to view the available pay period options.
3. Select [Monthly Pay Period].
To Next Page
Loading...
