23
Smart Surveillance
4� The system will automatically create volumes from the installed disk drives� The process will
take several minutes� Hard disks will be congured into single-disk volumes� You can delete
these volumes and then create RAID volumes in the Settings > Storage page�
If the need should arise, you can manually enter an IPv6 address to recruit a camera� Note that
currently you can not search a camera with an IPv6 address in the device search panel�
Note the following when using IPv6 addresses:
• Abbreviation is supported� For example, :: for 0000:0000�
• If illegal characters are entered, conflict warning messages will display�
NOTE:
To Next Page
Loading...