142
Chapter 5: Operation
5-1� Liveview
5-1-1� Placing Cameras into the Layout
Legends and denitions of icons on the layout panel have been described on page 87� It’s
presumed that you have properly inserted all network cameras in your deployment as previously
described on page 87� All eight (8) cameras should be listed on the Camera list�
1� Before operating the NVR, make sure you have properly installed hard drives and congured the
storage volumes� Otherwise, you will not be able to operate most of the system's functionality�
Note that layout design can only be performed by the system administrator�
Camera List
Layout Design
Layout Contents
IMPORTANT:
To Next Page
Loading...