Nidec Unidrive M600 Series - Product Information; 3.1 Model number

Safety
information
Introduction
Product
Information
System
design
Mechanical
Installation
Electrical
Installation
Getting
started
Optimization Parameters
Technical
data
Component
sizing
Diagnostics
UL
Information
Unidrive M Regen Design Guide 15
Issue Number: 4
3 Product Information
3.1 Model number
The way in which the model numbers for the Unidrive M range are formed is illustrated below.
The internal EMC filter and negative DC terminal are not accessible on Unidrive M frames 9E/T, 10E/T and 11E/T. These power formats are therefore
not suitable for Regen systems.
Figure 3-1 Rectifier model number
Identification Label
Electrical Specifications
Derivative
Unidrive M range
Frame Size:
Voltage Rating:
Current Rating:
Heavy Duty current rating x 10
Power Format:
Reserved
0
Optional Build
Customer Code
01
A B 1 00
Customer Code:
00 = 50 Hz
01 = 60 Hz
Reserved:
Conformal Coating:
0 = Standard
IP / NEMA Rating:
1 = IP20 / NEMA 1
Brake Transistor:
B = Brake
Cooling:
A = Air
Documentation
1
Documentation:
0 - Supplied separately
1 - English
2 - French
3 - Italian
4 - German
5 - Spanish
2 - 200 V (200 - 240
- 400 V (380 - 480
- 575 V (500 - 575
- 690 V (500 - 690
± 10 %)
4 ±
±
±
10 %)
5 10 %)
6 10 %)
Power
Format
M600 - 03 4 00078 A
Configuration*
1
A - AC in AC out (Integrated Rectifier / Inverter with internal choke)
D - DC in AC out (Inverter)
A - AC in DC out (Rectifier)
E - AC in AC out (Integrated Rectifier / Inverter with internal choke)
Configuration:
1 - Standard
U - No Control
M - Master
F - Follower
T - AC in AC out (Integrated 12P Rectifier / Inverter)
T - AC in DC out (Twin Rectifier)
N = No brake
M600 - EIA-485
M700 - Ethernet
M701 - EIA-485
NOTE
RECT
10 6
02480
A
Model
Frame size
Voltage 2=200 V
4=400 V
6=690 V
Current rating
Rectifier format