Nidec Unidrive M600 Series - 9.6 Menu 6: Sequencer and Clock

Safety
information
Introduction
Product
Information
System
design
Mechanical
Installation
Electrical
Installation
Getting
started
Optimization Parameters
Technical
data
Component
sizing
Diagnostics
UL
Information
Unidrive M Regen Design Guide 173
Issue Number: 4
9.6 Menu 6: Sequencer and Clock
Figure 9-4 Menu 6 logic diagram
Drive tripped
Final drive
enable
Sequencer state
machine
Drive Enable (06.015)
Sequencer (Regen mode)
Enable logic
06.010
Enable
Conditions
10.016
Under Voltage
Active
Trip detection system
(Menu 10)
Charge System Disabled /
Contactor Closed (03.008)
03.009
Synchronised
10.002
Drive
Active
06.011
Sequencer State
Machine Inputs
03.007
Disable Charge
System / Close
Contactor
03.009
Synchonised /
Enable Motor Drive
06.029
Hardware
Enable