Nidec Unidrive M600 Series - 10.4 Component data

Safety
information
Introduction
Product
Information
System
design
Mechanical
Installation
Electrical
Installation
Getting
started
Optimization Parameters
Technical
data
Component
sizing
Diagnostics
UL
Information
Unidrive M Regen Design Guide 291
Issue Number: 4
10.4 Component data
The following parts may be used:
• Motoring drive
• Regen drive
• Regen inductor
• Softstart resistor
• Switching frequency filter (optional)
• EMC filter (optional)
•Varistors
•Fusing
• Contactors
• Overloads
In addition to the above the additional items are also required to assemble a Unidrive M Regen Brake Resistor replacement system:
• Isolating transformer
10.4.1 Regen filter components for low quality/high harmonic power supplies
Table 10-20 200 V (200 V to 240 V ±10 %) Regen filter components to support up to 8 % THD
v
on the grid
* Modify Rated Current (05.007) to match current rating of inductor.
The internal EMC filter must be removed from drive.
Drive mode Regen inductor SFF inductor SFF capacitor
Heavy
Duty
Normal
Duty
mH Arms
Part
number
mH Arms
Part
number
Capacitor
combination
Capacitor
connection
Rated
voltage
Vac
Part
number
Max.
capacitor
current per
can @
50 °C
(Arms)
Fuse
rating
(A)
Cap
bank A
µF
Cap
bank B
µF
03200080 03200066 3.500 9.6 4401-0310 0.880 96 4401-1310
10
Not
fitted
Delta 780 1610-8104 15
12
03200106 03200080 2.700 11
4401-0311 1.500 11 4401-1311
8
03200106 2.700 11
8
04200137 04200137* 2.200 15.5
4401-0312 1.100 15.5 4401-1312
10
04200185* 2.200 15.5
10
05200250* 04200185* 1.600 22 4401-0313 0.700 22 4401-1313
8
06200330*
1.100 31 4401-0314 0.500 31 4401-1314
22 Star 550 1610-8224 25 8
05200250 10 Delta 780 1610-8104 15 8
06200330 0.600 56 4401-0316 0.300 56 4401-1316
33 Star 550 1610-8334 30
16
06200440*
0.810 42 4401-0315 0.400 42 4401-1315 10
07200610*
0.600 56 4401-0316 0.300 56 4401-1316
15
Delta
640 1610-8154 20 12
06200440* 33
550
1610-8334 30 10
07200750 07200610 0.400 80 4401-0318 0.200 80 4401-1318
22 1610-8224 25
20
07200750 0.320 105 4401-0319 0.160 105 4401-1319 25
07200830*
0.400 80 4401-0318 0.200 80 4401-1318 20
08201160*
0.320 105 4401-0319 0.160 105 4401-1319
33 1610-8334 30 25
07200830* 22 1610-8224 25 25
08201320 08201160 0.220 156 4401-0321 0.110 156 4401-1321 33 1610-8334 30 32
09201760
0.180 192
4401-0322 0.088 192 4401-1322
68 1610-8684 40 40
08201320 0.180 192 47 1610-8474 35 40
09202190* 09201760* 0.180 192
68 1610-8684 40
40
09202190* 0.140 250 4401-0323 0.068 250 4401-1323 50
10202830 10202830* 0.110 312
4401-0324 0.055 312 4401-1324
47 47 1610-8474 35
63
10203000
0.110 312
63
10203000* 0.100 350 4401-0325 0.048 350 4401-1325
80
CAUTION